Skip to main content

Changes to Step #4

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Flip up the metal retaining bracket on the iSight camera cable connector.
- [* black] Disconnect the iSight camera cable.
- [* icon_caution] This is a delicate connection that can easily be broken. Be sure to pull the display camera cable connector straight out of its socket.
+[* black] Use the flat edge of a spudger to flip up the metal retaining bracket on the iSight camera cable connector.
+[* black] Pull the iSight camera cable straight out of its socket on the logic board.
+[* icon_caution] This is a delicate connector that can be easily damaged.