Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #4

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] Insert the tip of a spudger under the vibrator to free it from the adhesive holding it to the display assembly.
[* icon_caution] Be careful not to immediately remove the vibrator, as its cable is also adhered to the rear of the display assembly.
[* black] Use the tip of a spudger to pry the vibrator cable up from the display assembly.
[* blackicon_note] Heat works as a great "persuader" here to soften the adhesive. Liberal application of heat from a heat gun will soften the adhesive. If you pry carefully, you can save and re-use the adhesive.
[* blackicon_note] Heat works as a great "persuader" here to soften the adhesive. Liberal application of heat from a heat gun will soften the adhesive. If you pry carefully, you can save and re-use the adhesive.