Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Nick

Edit approved by Nick

Before
After
Unchanged

Step Lines

[title] PushingPut the device intoin recovery mode
[* black] When theicon_note] The logo at this screen is firmware and device getsdependent. 30-pin devices generally show a screen that is similar to this while Lightning devices replace the male USB plug with a Lightning connector.
[* black] Once
the Apple logologo shows up on the screen, let go of the power button. KeepContinue holding the home button. Do thisbutton until the iPod comes up the screen shown.
[* icon_reminder] The iTunes icon will vary from device to device. On Lightning devices, you will see a Lightning cable rather then a USB cable
on the screenexample device appears.
[title] PushingPut the device intoin recovery mode
[* black] When theicon_note] The logo at this screen is firmware and device getsdependent. 30-pin devices generally show a screen that is similar to this while Lightning devices replace the male USB plug with a Lightning connector.
[* black] Once
the Apple logologo shows up on the screen, let go of the power button. KeepContinue holding the home button. Do thisbutton until the iPod comes up the screen shown.
[* icon_reminder] The iTunes icon will vary from device to device. On Lightning devices, you will see a Lightning cable rather then a USB cable
on the screenexample device appears.