Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #8

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] After the copy is complete, click "Ok" and quit SuperDuper!.
[*
black] At this point, your new hard drive should be loaded witha clone of your existing softwaredrive and ready to install; howeverinstall.
[* icon_note] However
, we recommend testing the software installationcloned drive before physically swapping the drives. This can be done by attempting to boot from the new cloned drive through the USB enclosure.
[* black] Keep the enclosure connected to the computer and restart the computer. Hold down the '''"option"''' key as it reboots until a boot option menu shows up
.
[* black] After the copy is complete, click "Ok" and quit SuperDuper!.
[*
black] At this point, your new hard drive should be loaded witha clone of your existing softwaredrive and ready to install; howeverinstall.
[* icon_note] However
, we recommend testing the software installationcloned drive before physically swapping the drives. This can be done by attempting to boot from the new cloned drive through the USB enclosure.
[* black] Keep the enclosure connected to the computer and restart the computer. Hold down the '''"option"''' key as it reboots until a boot option menu shows up
.

Image 1

Old Version

New Version

Image 2

Deleted