Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* red] Select your new hard drive from the left column in Disk Utility.
[* icon_note] If the new drive is not showing up, disconnect the enclosure and check if the hard drive is properly connected to the enclosure.
[* orange] Select the '''Erase''' option near the top row of buttons.
[* black] Select a name for your new drive, and select '''"Mac OS Extended (Journaled)APFS"''' for the format.
[* black] Select a name for your new drive, and select '''"Mac OS Extended (Journaled)APFS"''' for the format.
[* icon_caution] '''Warning:''' Pressing the erase button will erase the entire contents of the drive. Make sure you have selected the new hard drive!
[* black] Press the '''erase''' button.
[* icon_note] This process may take up to 10 minutes, so be patient.
[* black] Quit Disk Utility once the erase is complete.