Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to this Step

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] UsingUnder the previous step, orient the new drive so that its SATA connectors will align with the enclosure's."Go" pulldown menu, select "Utilities."
[* black] Slide the drive into the enclosure's opening.
[* black] Push the drive into the enclosure until it stops sliding and
Open "Disk Utility" from the SATA connectors are completely seated"Utilities" window.
[* black] UsingUnder the previous step, orient the new drive so that its SATA connectors will align with the enclosure's."Go" pulldown menu, select "Utilities."
[* black] Slide the drive into the enclosure's opening.
[* black] Push the drive into the enclosure until it stops sliding and
Open "Disk Utility" from the SATA connectors are completely seated"Utilities" window.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted