Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to this Step

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] UnderUsing the "Go" pulldown menu, select "Utilities."previous step, orient the new drive so that its SATA connectors will align with the enclosure's.
[* black] Open "Disk Utility" fromSlide the drive into the enclosure's opening.
[* black] Push the drive into the enclosure until it stops sliding and
the "Utilities" windowSATA connectors are completely seated.
[* black] UnderUsing the "Go" pulldown menu, select "Utilities."previous step, orient the new drive so that its SATA connectors will align with the enclosure's.
[* black] Open "Disk Utility" fromSlide the drive into the enclosure's opening.
[* black] Push the drive into the enclosure until it stops sliding and
the "Utilities" windowSATA connectors are completely seated.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added