Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to this Step

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] You will need to put theInstall your new hard drive intoin the external enclosure.
[* black] Connect
the 2.5" enclosure in order to clone your existing hard drive onto itMac.
[* black] Before insertingicon_note] If the installation of the new drive has already been completed; this process can be continued by connecting the original hard drive, notedrive to the orientation ofenclosure, and holding 'Option' when powering on the SATA connectors embedded incomputer to boot from the enclosure:
[* red] The wide power SATA port
[* orange] The narrower data SATA port
original hard drive.
[* black] You will need to put theInstall your new hard drive intoin the external enclosure.
[* black] Connect
the 2.5" enclosure in order to clone your existing hard drive onto itMac.
[* black] Before insertingicon_note] If the installation of the new drive has already been completed; this process can be continued by connecting the original hard drive, notedrive to the orientation ofenclosure, and holding 'Option' when powering on the SATA connectors embedded incomputer to boot from the enclosure:
[* red] The wide power SATA port
[* orange] The narrower data SATA port
original hard drive.

Image 1

Old Version

New Version

Image 2

Deleted