Skip to main content

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

-[* icon_note] It is not necessary to peel all of the EMI tape off the optical drive. Only peel up the portion highlighted to gain access to the locking tabs securing the optical drive to the bracket.
-[* black] Peel a portion of the EMI tape off the optical drive.
-[* icon_reminder] Don't forget to transfer this to your new optical drive.
+[* icon_note] It is not necessary to peel all of the EMI tape off the optical drive bracket. Only peel up the portion highlighted in red that is attached to the body of the optical drive.
+[* red] Peel back the portion of aluminum tape highlighted in red, leaving the rest attached to the black plastic optical drive bracket.