Skip to main content

Changes to this Step

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Disconnect the thermal sensor, SATA power, and SATA data cables by pulling their connectors away from the sockets on the hard drive.
-[* icon_reminder] When plugging the thermal sensor connector back into the hard drive, be sure it is inserted onto the set of pins furthest away from the SATA connectors.
+[* icon_reminder] When plugging the thermal sensor connector back into the hard drive, be sure it is inserted onto the set of pins closest to the SATA connectors.