Skip to main content

Changes to Step #20

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Flip up the metal retaining bracket on the display data cable.
-[* black] Disconnect the display data cable.
- [* icon_caution] This is a delicate connection that can easily be broken. Be sure to pull the display data cable connector straight out of its socket, toward the top of the iMac.
+[* black] Use the tip of a spudger to flip up the metal retaining bracket on the display data cable.
+[* black] Carefully pull the display data cable from its socket on the logic board.
+[* icon_caution] Be sure to pull the display data cable connector straight out of its socket.