Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #18

Edit by Walter Galan

Edit approved by Walter Galan

Deleted
Added
Unchanged

Step Lines

[* black] With theboth plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case.
[* blackicon_note] If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem arearemaining adhesive.
[* black] With theboth plastic cards inserted as shown near the corners, gently twist the cards sideways to increase the gap between display and case.
[* blackicon_note] If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem arearemaining adhesive.
[* black] Begin to lift the top of the display up from the frame.
[* icon_caution] Only lift the display a few inches—it isinches—the display data and power cables are still attachedconnected to the iMac by data and power cableslogic board.
[* icon_caution] Only lift the display a few inches—it isinches—the display data and power cables are still attachedconnected to the iMac by data and power cableslogic board.