Skip to main content

Changes to Step #2

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following four screws securing the power supply to the rear case:
[*
case (size T8 or T10 depending on the exact model):
[*
red] Two 23.7 mm T10 screws.Torx screws
[* orange] Two 7.3 mm T10 screws.Torx screws
[* black] Remove the following four screws securing the power supply to the rear case:
[*
case (size T8 or T10 depending on the exact model):
[*
red] Two 23.7 mm T10 screws.Torx screws
[* orange] Two 7.3 mm T10 screws.Torx screws