Skip to main content

Changes to Step #2

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following four screws securing the power supply to the rear case:
[* red] Two 23.7 mm screwsT10 screws.
[* orange] Two 7.3 mm screws
[* icon_note] These will be either T8 or
T10 Torx screws, depending on which variant you are working withscrews.
[* red] Two 23.7 mm screwsT10 screws.
[* orange] Two 7.3 mm screws
[* icon_note] These will be either T8 or
T10 Torx screws, depending on which variant you are working withscrews.