Skip to main content

Changes to this Step

Edit by Dan H

Edit declined by Scott Havard

Deleted
Added
Unchanged

Step Lines

[title] Blow Clean with Air and then Reassemble
[* black] Use a can of compressed air to blow the Mac clean before you re-assemble it. Be careful not to tip the can and blow wet material. A special anti-static vacuum can work well too, just don't use a standard vac.
[* black] Blow out all the vents along the bottom and the one behind the mac up above the power input as well. Cautiously blow around the Fan and Circuit Board/s until the unit is clean.
[* black] Free flowing vents are really important for proper cooling.