Changes to this Step
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| + | [title] Disconnect the black antenna cable |
|---|---|
| + | [* black] Use angled tweezers to grip the ***black*** antenna connector, as close to the connector head as possible. |
| + | [* black] Lift straight up to disconnect the cable. |
| + | [* icon_caution] Be careful not to tear the socket from the logic board as you disconnect the cable. |
| + | [* icon_reminder] To reattach coaxial connectors like these, align the connector over its socket and press down with the flat end of a spudger. The connector should snap into place. |