Fix Your Stuff Community Store

Changes to Step #9

Edit by Spencer Day —

Edit approved by Spencer Day

Before
After
Unchanged

Step Lines

[title] Remove the final hinge screws
[* red] While holding the screen steady, use a T6 Torx driver to remove the two remaining 5.9 mm screws securing the screen (one on each side).
- [* icon_note] If the screen is exactly perpendicular to the lower case, a screwdriver handle may hit the screen during removal. If you're having trouble, tilt the screen back enough to clear the driver.
+ [* icon_note] If the screen is exactly perpendicular to the lower case, the screwdriver handle may hit the screen during removal. If you're having trouble, tilt the screen back enough to clear the driver.