Changes to Step #9
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [title] Remove the final hinge screws | |
| [* red] While holding the screen steady, use a T6 Torx driver to remove the two remaining 5.9 mm screws securing the screen (one on each side). | |
| - | [* icon_note] If the screen is exactly perpendicular to the lower case, a screwdriver handle may |
| + | [* icon_note] If the screen is exactly perpendicular to the lower case, a screwdriver handle may hit the screen during removal. If you're having trouble, tilt the screen back enough to clear the driver. |