Changes to Step #9
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove the final hinge screws |
|---|---|
| + | [* red] While holding the screen steady, use a T6 Torx driver to remove the two remaining 5.9 mm screws securing the screen, one on each side. |
| + | [* icon_note] With these two final screws removed the screen will be freed from the rest of the device, so hold it steady. |
| + | [* icon_note] If the screen is exactly perpendicular to the lower case, a screwdriver handle may contact the display during removal. If you're having trouble, lightly tilt the screen back enough to clear the driver. |
Image 1
No previous image
Added
Image 2
No previous image
Added