Changes to Step #7
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [title] Remove four hinge screws | |
| - | [* icon_caution] When removing the hinge screws, make sure to hold the screen steady as it will become as the screws are removed. |
| + | [* icon_caution] When removing the hinge screws, make sure to hold the screen steady as it will become loose as the screws are removed. |
| [* red] While holding the screen steady, use a T6 Torx driver to remove the four outermost 5.9 mm screws securing the screen (two on each side). | |
| [* icon_note] Both hinges should have one remaining screw (two total). Leave these screws in place. |