Fix Your Stuff Community Store

Changes to this Step

Edit by Spencer Day —

Edit approved by Spencer Day

Before
After
Unchanged

Step Lines

[title] Remove the display connector shields
-[* black] Use an opening tool to pry up the black shield covering the right bank of display connectors.
+[* black] Use an opening tool to pry up the black shield covering the right display cables.
[* icon_note] Try not to deform the shield too much—you will need to reinstall it during reassembly.
-[* black] Repeat at different points around the shield until it's loose.
+[* black] Pry along the perimeter of the shield until it's loose.
[* black] Pull the shield towards the bottom of the laptop to remove it.