Changes to Step #8
Edit by Walter Galan —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| [* red] While holding the Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket. | |
| - | [* icon_caution] Before removing the last display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage. |
| - | [* orange] Remove the last 4.9 mm T8 Torx screw securing the display to the upper case. |