Skip to main content

Changes to Step #6

Edit by Walter Galan

Edit approved by Walter Galan

Deleted
Added
Unchanged

Step Lines

[* icon_note] If the heat sink seems to be stuck to the logic board after removing all four screws, use a spudger to carefully separate the heat sink from the faces of the CPU and GPU.
[* black] Remove the heat sink from the logic board.
[* icon_reminder] When reinstalling the heat sink, be sure to apply a new layer of [product|IF179-010|thermal paste]. If you have never applied thermal paste before, we have a [guide|744|guide] that makes it easy.