Changes to Step #4
Edit by AntonioTwingo —
Edit approved by AntonioTwingo
- Before
- After
- Unchanged
Step Lines
| + | [title] Installating the new spark plugs |
|---|---|
| [* black] Torque down the new spark plug using a 14mm spark plug socket at 24 N.m. | |
| [* icon_note] Verify and ajust the spark plug gap to the considered model's spec if necessary. | |
| [* icon_caution] The RTA (French Revue Technique Automobile) and spark plug manufacturers advise not to grease the spark plug's thread. | |
| [* icon_caution] Do not modify an used spark plug's gap. |