Skip to main content

Changes to Step #3

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

+[* icon_caution] The following connector has an especially deep socket. Use care when disconnecting it.
+[* black] While gently pulling the I/O board cable upward near its connection to the logic board, use the tip of a spudger to pry upward on alternating sides of the connector to help "walk" it out of its socket.
+[* black] Remove the I/O board cable.

Image 1

No previous image

Added

Image 2

No previous image

Added