Skip to main content

Changes to Step #1

Edit by Richdave

Edit approved by Richdave


Step Lines

[* red] With the bottom of the laptop facing up and the front toward you locate and loosen the two M2.0×5.0 '''captive '''screws holding the hard drive bay cover closed.
[* black] Lift the left side of the bay cover and swing it up and to the right to remove it.
[* blue] Loosen the M2.5×10.0 captive screw that holds the hard drive in.
[* green] Grasp the plastic tab and slide the hard drive to the right to disconnect it from the logic board.
[* black] Lift the hard drive straight up and out of the laptop.

Image 2

Old Version

New Version

Image 3

No previous image