Changes to Step #10
Edit by Ashley m. Wuthrich -Hoffman —
Edit approved by Ashley m. Wuthrich -Hoffman
- Before
- After
- Unchanged
Step Lines
| + | [* black] Check the P-Trap for leaks. |
|---|---|
| + | [* black] Turn water valve on Check the pipe for leaks by running the water for 30 seconds or more (Tip hot water is easier to identify). |
| + | [* black] Use your hand to identify any water. If you do identify which section is leaking and tighten the nut. |
| + | [* black] If it continues to leak you may need to use threading tape. Which is shown in the next step. |
Image 1
No previous image
Added