Skip to main content

Changes to Step #13

Edit by Chris Green

Pending approval

Before
After
Unchanged

Step Lines

+[* black] Removing the power supply
+[* black] Disconnect the power connector from the logic board (this looks alot like a standard ATX connector, but I have yet to test the voltages)
+[* black] There is a 4-Pin Cable connected to the front panel box, remove it.
+[* black] Disconnect the internal fan cable.
+[* red] The Fan Connector
+[* black] Than Route all of the cables up through the case to the level of the power supply

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added