Skip to main content

Changes to Step #4

Edit by Chris Green

Pending approval

Before
After
Unchanged

Step Lines

[* black] Removing The CPU
[* black] Start by using a flathead to gently pry off the clip, remember you have to put it back on again!
-[* black] Than remove the heatsink
-[* black] This reveals the Motorola PowerPC G3 CPU, this is the 400Mhz Model
+[* black] Then, remove the heatsink.
+[* black] This reveals the Motorola PowerPC G3 CPU, this is the 400Mhz Model.