Changes to this Step
Edit by bealejones —
Edit approved by bealejones
- Before
- After
- Unchanged
Step Lines
| - | [* black] Using the Torx T5 screwdriver, remove all ten screws (3mm) on the back cover. |
|---|---|
| + | [* black] Lift the back cover off the plate and remove the four screws (4mm) holding the battery in place. |
| + | [* black] Use the iFixit opening tool to disconnect the battery connector from the motherboard. |
| + | [* black] Pick up and remove the battery from the system. |
Image 1
Old Version
New Version
Image 2
Old Version
New Version
Image 3
Old Version
New Version