Skip to main content

Changes to this Step

Edit by bealejones

Edit approved by bealejones

Before
After
Unchanged

Step Lines

[* black] Make sure your device is ++powered off++ and ++unplugged++ before starting.
[* black] Flip the device over so the base cover of the computer is facing upwards.
+[* black] Using a Torx T5 screwdriver, remove the ten screws (3mm) on the back.
+[* black] Flip open the system badge and remove the two screws (8.5mm) with a Phillips #00 screwdriver.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added