Changes to Step #13
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| [* black] While we're happy to note that the adhesive inside the charging case battery is not too stubborn, and there's no heat required to remove it ... | |
| [* black] ... all the same, we're wary of all these repair-complicating soldered connections. Keeping internal connections secure is a concern in any wearable for sure, but we've seen competitors accomplish the same with a lot more modularity. | |
| - | [* black] The rated voltage of the case battery is 3.85 V at 570 mAh and 2.194 Wh. That's about 0.1 Wh more than the dual-cell battery in the [guide|127551|AirPod Pro charging case|new_window=true], and a lot more than the 1.03 Wh [link|https://www.youtube.com/watch?v=Mg6OpvMzguY |
| + | [* black] The rated voltage of the case battery is 3.85 V at 570 mAh and 2.194 Wh. That's about 0.1 Wh more than the dual-cell battery in the [guide|127551|AirPod Pro charging case|stepid=247997|new_window=true], and a lot more than the 1.03 Wh [link|https://www.youtube.com/watch?v=Mg6OpvMzguY|Galaxy Bud case|new_window=true] has to offer. |