Skip to main content

Changes to Step #12

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

[* black] The glued-in charging coil separates easily from the housing, but remains soldered to the bottom board of the charging case.
[* black] The bottom board holds onto the soldered USB-C charging port, the pairing button, and some more chips:
- [* red] ThinkPlus Semiconductor [link|https://osch.oss-cn-shanghai.aliyuncs.com/blogContentFile/1571714102322.pdf%7C|SY8801|new_window=true] smart charge power and communication chip
+ [* red] ThinkPlus Semiconductor [link|https://osch.oss-cn-shanghai.aliyuncs.com/blogContentFile/1571714102322.pdf|SY8801|new_window=true] smart charge power and communication chip
[* orange] NuVolta [link|http://en.nuvoltatech.com/product/nu1619155/134.html|NU1680|new_window=true] Wireless Power Receiver
[* yellow] Zbit Semiconductor, Inc. [link|http://zbitsemi.com/en/display.php?id=44|CX32L003F8|new_window=true] 32-Bit ARM Cortex-M0+ Microcontroller w/ 64 KB Flash
[* black] We have to say, there definitely seems to be room for more modularity in these products—at least within the charging case. Dear Nothing, since you're already showing off those tech-tastic internals, why not make it repair-friendly as well?