Changes to Step #12
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] The glued in charging coil is easily separated from the housing but is soldered to the bottom board of the charging case. |
| + | [* black] Besides that, the bottom board holds onto the, yet again soldered USB-C charging port. |
| + | [* black] We have to say that there is definitely room for more modularity in here—at least within the charging case. Dear Nothing, if you're already showing some of the tech inside, why not make it repair friendly as well? |