Changes to Step #10
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| [* black] With the board removed we're able to pull the full battery cable assembly out of the ear (1) head with plenty of odds and ends attached to it: | |
| [* black] The gesture control cable | |
| [* black] Two connectors, one for the board and one for the driver assembly | |
| [* black] An antenna cable | |
| [* black] Power IC/ Bluetooth chip? | |
| - | [* black] The soldered battery which is running at 3.7 V with 31 mAh. This sums up to ~ 0.11 Wh. |
| + | [* black] The soldered battery which is running at 3.7 V with 31 mAh. This sums up to ~0.11 Wh. |
| + | [* icon_note] For those interested—the button cell has a ~10 mm diameter and a hight of ~4.4 mm. |
| [* black] In comparison we have the AirPod Pro battery with 0.16 Wh and the slightly bigger Galaxy Buds with 0.2 Wh. |