Skip to main content

Changes to Step #10

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged

Step Lines

-[* black] With the board removed we're finally able to pull the full cable assembly out of the ear (1) head with plenty of odds and ends attached to it:
+[* black] With the board removed we're able to pull the full battery cable assembly out of the ear (1) head with plenty of odds and ends attached to it:
[* black] The gesture control cable
[* black] Two connectors, one for the board and one for the driver assembly
[* black] An antenna cable
[* black] Power IC/ Bluetooth chip?
[* black] The soldered battery which is running at 3.7 V with 31 mAh. This sums up to ~ 0.11 Wh.
[* black] In comparison we have the AirPod Pro battery with 0.16 Wh and the slightly bigger Galaxy Buds with 0.2 Wh.