Changes to Step #10
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] With the board removed we're finally able to pull the full cable assembly out of the ear (1) head with plenty of odds and ends attached to it: |
| + | [* black] The gesture control cable |
| + | [* black] Two connectors, one for the board and one for the driver assembly |
| + | [* black] An antenna cable |
| + | [* black] Power IC/ Bluetooth chip? |
| + | [* black] The soldered battery which is running at 3.7 V with 31 mAh. This sums up to ~ 0.11 Wh. |
| + | [* black] In comparison we have the AirPod Pro battery with 0.16 Wh and the slightly bigger Galaxy Buds with 0.2 Wh. |