Fix Your Stuff Community Store

Changes to Step #8

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Inside the stem we find a sandwich build consisting of the flex cable for gesture control, a protective cover for the board and the board itself.
-[* black] And here we go again—another press fit connector attaches the battery cable assembly to the board and another time it's glued down.
- [* black] With a bit of tweezers fiddling we're able to disconnect the flex cable like we did before and wonder if we're just lucky with our example of the ear (1) or Nothing howsoever managed to put just enough adhesive in their headphones to keep the connectors in place whilst making disconnecting them still possible.
-[* black] And finally we hold the completely modular ear (1) main unit in our hands ...
+[* black] Inside the stem we find a sandwich build consisting of the flex cable for gesture control, a protective cover for the board, and the board itself.
+[* black] Another glob of glue holds the press-fit connector for the battery cable assembly to the board. Here we go again!
+ [* black] Some gentle tweezing disconnects the flex cable as before. We wonder if we're just lucky with our specimen of the ear (1), or if Nothing managed to use ''just'' the right mix of adhesive to keep the connectors in place without hindering disassembly too much.
+[* black] Finally, we hold the completely modular ear (1) main unit in our hands ...

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version