Changes to Step #7
Edit by Tobias Isakeit —
Edit approved by Tobias Isakeit
- Before
- After
- Unchanged
Step Lines
| - | [* black] With one half of the |
|---|---|
| + | [* black] With one half of the Ear (1) fully disassembled, we're keen to finally check out the button cell ... |
| [* black] ... and we're stopped by two cables clenching the cell tight in their soldered embrace. | |
| [* icon_note] A soldered battery makes a repair way more complex than we'd like. At this point a battery replacement might be possible, but requires delicate soldering work. | |
| [* black] We leave the battery alone for a moment and remove its plastic brace instead. Embedded within we find the main magnet, which holds the headphone in its charging position inside the case. | |
| [* black] With nothing left in the opaque white head portion, we'll proceed into the fancy-looking see-through part with the board in it. | |
| [* black] Expecting the worst, we're surprised to lever open the stem rather quickly. A little bit of heat and prying with an [product|IF145-335-2|opening tool|new_window=true] grants access to the remaining components. |