Changes to Step #15
Edit by Sam Omiotek —
Edit approved by Sam Omiotek
- Before
- After
- Unchanged
Step Lines
| [title] Open the Surface | |
| [* black] Very slowly lift the screen assembly away from the Surface case. If you encounter any resistance, stop and check that all the adhesive is separated. | |
| [* icon_caution] Do not remove the screen yet. It is still connected to the motherboard by two cables. | |
| [* black] Use an opening pick to cut through any remaining adhesive. | |
| + | [* icon_reminder] [link|https://guide-images.cdn.ifixit.com/igi/JgK6Y2g5VJFdXEZW.full|The flash lens may fall out of the Surface case|new_window=true]. Keep track of the lens and return it to its cutout in the case during reassembly. |