Changes to Step #15
Edit by Sam Omiotek —
Edit approved by Sam Omiotek
- Before
- After
- Unchanged
Step Lines
| + | [title] Open the Surface |
|---|---|
| + | [* black] Very slowly lift the screen assembly away from the Surface case. If you encounter any resistance, stop and check that all the adhesive is separated. |
| + | [* icon_caution] Do not remove the screen yet. It is still connected to the motherboard by two cables. |
| + | [* black] Use an opening pick to cut through any remaining adhesive. |
Image 1
No previous image
Added
Image 2
No previous image
Added