Changes to Step #2
Edit by Sam Omiotek —
Edit approved by Sam Omiotek
- Before
- After
- Unchanged
Step Lines
| + | [title] Heat the right edge of the screen |
|---|---|
| + | [* icon_caution] Completely power off the Surface before you begin disassembly. |
| + | [* black] If the screen's glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass. Wear safety glasses to protect your eyes. |
| + | [* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the right edge of the Surface's screen for two minutes. |
| + | [* icon_note] You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating. |
| + | [* icon_caution] A hair dryer or heat gun may also be used for more heat, but be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage. |
Image 1
No previous image
Added