Skip to main content

Changes to Step #8

Edit by Robert Boyd

Edit approved by Robert Boyd

Before
After
Unchanged

Step Lines

-[* black] Insert the flat end of a spudger in the groove in the speaker housing, near the corner of the rear case.
-[* black] Push speaker away from the corner of the rear case.
+[* black] Insert the flat end of a spudger into the groove in the speaker housing, near the corner of the rear case.
+[* black] Push the speaker away from the rear case.
+[* black] Push the speaker out from underneath the shelf on the rear case.

Image 3

No previous image

Added