Skip to main content

Changes to Step #5

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

-[* black] Place the port cover plate onto the end of the enclosure.
- [* icon_note] The screw hole chamfers should face outwards.
+[* black] Place the port cover plate onto the end of the enclosure, aligning the USB-C port with its cutout.
+ [* icon_note] The screw hole [link|https://guide-images.cdn.ifixit.com/igi/lQWCJBMSsEfXGjIX.full|chamfers] should face outwards.