Skip to main content

Changes to Step #4

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

+[title] Reassemble the enclosure
[* black] Slide the SSD sled into the metal enclosure, SSD end first.
[* icon_note] Make sure the enclosure is in the correct orientation—the sled slides in on the [link|https://guide-images.cdn.ifixit.com/igi/cBHdU6rCtApqx3oV.full|thin rails].
[* icon_note] The USB-C port should be facing out once installed.