Skip to main content

Changes to Step #2

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

+[title] Install the SSD into the enclosure
[* black] Carefully insert your Mac OEM SSD as shown, with the [https://guide-images.cdn.ifixit.com/igi/VGFrONN2LqGe2hAP.full|golden contact pads|new_window=true] below the connector pins facing upward.
[* icon_note] The SSD and enclosure are both keyed, so the SSD can only be installed one way.
[* icon_caution] The SSD might take a significant amount of force to insert. Make sure you have the orientation correct before you apply any pressure.
[* icon_note] When the SSD is fully inserted, the notch at the bottom of the drive should be [https://guide-images.cdn.ifixit.com/igi/nN1hM1AdxdOdc1fI.full|aligned with the hole|new_window=true] for the screw in the enclosure.