Skip to main content

Changes to Step #12

Edit by Chris Green

Pending approval

Before
After
Unchanged

Step Lines

-[* black] removing the logic board
-[* red] remove these 4 phillips screws
-[* blue] this connector isn't used, it is left disconnected, I am assuming that it is to test the display for apple
-[* black] lift the logic board out if the case and set it aside
+[* black] Removing the logic board:
+[* red] Remove these 4 phillips screws.
+[* blue] This connector isn't used, it is left disconnected, I am assuming that it is to test the display for Apple.
+[* black] Lift the logic board out if the case and set it aside.