Skip to main content

Changes to Step #12

Edit by Chris Green

Pending approval

Before
After
Unchanged

Step Lines

[* black] removing the logic board
-[* black] remove these 4 phillips screws
-[* black] this connector isn't used, it is left disconnected, I am assuming that it is to test the display for apple
+[* red] remove these 4 phillips screws
+[* blue] this connector isn't used, it is left disconnected, I am assuming that it is to test the display for apple
+[* black] lift the logic board out if the case and set it aside

Image 2

No previous image

Added