Skip to main content

Changes to Step #5

Edit by Chris Green

Pending approval

Before
After
Unchanged

Step Lines

-[* black] removing the 2nd panel
+[* black] Removing the 2nd panel:
[* black] Grasp the bottom of the 2nd panel and lift it up, route the ADB cable through the hole.
-[* black] This will reveal a shiney metal panel
+[* black] This will reveal a shiney metal panel.
[* red] There may be tape here, remove it.
-[* yellow] remove this screw
+[* yellow] Remove this screw.