Skip to main content

Changes to Step #1

Edit by Kyle Smith

Edit approved by Kyle Smith

Before
After
Unchanged

Step Lines

[* black] Insert wisdom heretitle] Drilling information
[* icon_caution] Do not remove the inner plastic cover. This image is for illustrative purposes only.
[* icon_reminder] Inside the device, the circuit board and antenna frame have three notches for the clips and glue.
[* red] To avoid damaging the internal components, you'll drill through the space next to a clip
.
[* black] Insert wisdom heretitle] Drilling information
[* icon_caution] Do not remove the inner plastic cover. This image is for illustrative purposes only.
[* icon_reminder] Inside the device, the circuit board and antenna frame have three notches for the clips and glue.
[* red] To avoid damaging the internal components, you'll drill through the space next to a clip
.

Image 1

Old Version

New Version

Image 2

No previous image

Added